Solaris WaterGen A20 – EUROPEAN POWER PLUG 220 V

Description

🌿 Solaris WaterGen A20L Freestanding – Atmospheric Water Generator (AWG)

Clean, Sustainable Drinking Water – Directly from the Air

The Solaris WaterGen A20L is a freestanding atmospheric water generator designed to extract up to 20 liters of purified drinking water per day using ambient air humidity. This eco-friendly, self-contained solution requires no plumbing or external water source, making it ideal for homes, offices, schools, remote locations, and emergency preparedness.

With advanced filtration and smart circulation technology, the A20L ensures consistent, safe, and mineral-rich water on demand.

✅ Key Features

• Produces up to 20 liters/day of clean drinking water

• Freestanding design – no installation or plumbing required

• Multi-stage filtration including sediment, carbon, electropositive, membrane, mineral, and UV purification

• Smart display with real-time water level, temperature, and system status

• Built-in hot & cold water dispensers

• Ideal operating humidity: 31%–80% (lower output below 40%)

• Automatic water circulation every 6 hours for hygiene maintenance

📌 Important Usage Guidelines

📦 Before First Use:

• Let the unit stand upright for 24 hours to allow compressor oil to settle after shipment.

• Place the machine in a well-ventilated space (e.g., kitchen with open windows). Avoid areas with strong heating/cooling airflow, which can lower local humidity.

💧 Water Production Tips:

• Water becomes available when the screen shows 1/2 full.

• In lower humidity (spring), it may take up to 48 hours to reach that level.

• Let the machine run continuously for optimal performance.

🚿 Filter Flushing Before Use:

• Allow water to be produced for 5–6 days to flush out new filter dust and residue.

• Once the tank is 3/4 full, drain the water, then begin using it for drinking.

• This ensures maximum purity and taste.

🔥 Hot Water Use:

• Activate heating by pressing the button on the top rear panel once sufficient water has been generated.

• Dispense hot water by holding both the hot water button and red safety lock.

🔁 If Turned Off for 2+ Days:

• Drain all water from tanks and filters.

• When restarting, flush the system to remove any potential bacteria—especially in warmer climates.

🧼 Flushing the Internal Tanks and Pipes:

1. Power on the unit.

2. Fill the lower tank with tap water until full.

3. Drain through the rear drainage port.

4. Repeat 3 times. On the 4th flush, dispense from hot and cold taps, discard the first batch, and test the second. If issues remain, replace filters.

🧪 If Turned Off for 1+ Week: Deep Cleaning Required

• Remove filters and clean the system with a citric acid solution (13–15L recommended).

• Let sit in the internal tanks for 30 minutes, then drain.

• Reinstall filters and flush with clean water 3–4 times before resuming normal use.

🔒 Maintain Peak Performance

By following these steps and replacing filters on schedule, your A20L will deliver safe, fresh water day after day, even in challenging environments.